Contrast-induced nephropathy is a serious complication of intravascular x-ray contrast agents. The osmolality of the contrast medium is an important fact in contrast-induced nephropathy and should ideally be iso-osmolar to blood. Today, nonionic contrast agents are state of the art for vascular use, the ionic contrast agents caused more adverse reactions.
Signs of contrast-induced nephropathy after the application of vascular contrast agents are a serum creatinine increase of 0.5 mg/dL (In the United States, creatinine is typically reported in mg/dL, while in Canada and Europe µmol/L may be used. 1 mg/dL of creatinine is 88.4 µmol/L) or an increase of serum creatinine greater than 25%.

A higher risk of contrast-induced nephropathy is associated with:
The use of a nonionic contrast agent, iso-osmolar to blood and a low dose reduces the risk for contrast-induced nephropathy.

A controlled area is the area outside of a restricted area but within the area whose access is limited by licensed operators. The access, occupancy, and working conditions are controlled for radiation protection purposes.
A controlled area includes the location of a radioactive waste disposal facility, identified by institutional control that is intended to be used for monitoring and surveillance of a disposal facility and to act against or restrict public access, and the subsurface underlying a surface location.

Conventional (also called analog, plain-film or projectional) radiography is a fundamental diagnostic imaging tool in the detection and diagnosis of diseases. X-rays reveal differences in tissue structures using attenuation or absorption of x-ray photons by materials with high density (like calcium-rich bones).
Basically, a projection or conventional radiograph shows differences between bones, air and sometimes fat, which makes it particularly useful to asses bone conditions and chest pathologies. Low natural contrast between adjacent structures of similar radiographic density requires the use of contrast media to enhance the contrast.
In conventional radiography, the patient is placed between an x-ray tube and a film or detector, sensitive for x-rays. The choice of film and intensifying screen (which indirectly exposes the film) influence the contrast resolution and spatial resolution. Chemicals are needed to process the film and are often the source of errors and retakes. The result is a fixed image that is difficult to manipulate after radiation exposure. The images may be also visualized on fluoroscopic screens, movies or computer monitors.
X-rays emerge as a diverging conical beam from the focal spot of the x-ray tube. For this reason, the radiographic projection produces a variable degree of distortion. This effect decreases with increased source to object distance relative to the object to film distance, and by using a collimator, which let through parallel x-rays only.
Conventional radiography has the disadvantage of a lower contrast resolution. Compared with computed tomography (CT) and magnetic resonance imaging (MRI), it has the advantage of a higher spatial resolution, is inexpensive, easy to use, and widely available. Conventional radiography can give high quality results if the technique selected is proper and adequate. X-ray systems and radioactive isotopes such as Iridium-192 and Cobalt-60 for generating penetrating radiation, are also used in non-destructive testing.

See also Computed Radiography and Digital Radiography.

The conversion electron is a low shell electron emitted for the energy change of the atom by internal conversion.

See Internal Conversion, Auger Effect, Auger Electron.

Convolution is an important mathematical technique in digital signal processing. Raw data undergo spatial filtration prior to back projection by combining two signals to form a third signal. Convolution is related to the input signal, the output signal, and the impulse response. This operation is mostly used together with Fourier transformations for CT signal and image processing.