An acceptance checking is the condition inspection that takes place after a new installation or repair from nuclear-medical devices. Those results must be compared and agree with the provided data of the manufacturer.

A calibration is a correction procedure that determines the relationship between the measured output of a system and the reference standard. Calibration procedures include scanning air or an appropriate test phantom.
The calibration of a CT system takes account of variations in beam intensity or detector efficiency in order to achieve best homogeneity within the field of view and the accuracy of CT numbers.

See also Calibration Factor and Acceptance Checking.

(DQA) This procedure is used by system operators to verify an x-ray system, gamma camera, or CT scanner operation based on relevant image quality parameters like e.g., geometric distortion, x-ray yield, signal to noise ratio. The quality assurance should carry out according to instructions of the manufacturer.

See also Acceptance Checking, Calibration and Calibration Factor.

A phantom is an artificial object of known size and composition that is imaged to test, adjust or monitor the linearity, sensitivity, homogeneity, imaging performance and geometric aspects of CT scanners, gamma cameras or other radiographic systems. A phantom can be a fluid-filled container or bottle including structures of various materials, sizes and shapes.

See also Daily Quality Assurance and Acceptance Checking.