(FDD) The focus to detector distance is the distance between the focal spot of the x-ray tube and the radiation detectors.

A computed tomography (CT) scanner is used to create cross-sectional slices of different objects. The medical version of CT system scans the human body for tumors or other abnormalities, other versions are used for non-destructive testing in the industry.
The CT imaging system includes the moveable gantry and patient table or couch. The gantry is a frame that contains the x-ray source, collimators, filters, detectors, a data acquisition system (DAS), rotational components including slip ring systems and all associated electronics. The x-ray tube and detector system are mounted opposite each other, allowing a rapid and synchronous rotation around the patient table.
In older CT scanners a small generator supplied power to the x-ray tube and the rotational components via cables for operation. Up to the 4th generation the CT tube and detectors rotate together around the patient for each slice. CT systems with slip ring technology (the x-ray tube rotates around a stationary ring of detectors) operate without cables and provides continuous rotation of the gantry components without interference of cables. Spiral CT scanners work with a continuous table movement while the x-ray tube is rotating around the patient.

Overview about CT scanner generations:
See also Contrast Media Injector, Dual-Head CT Power Injector, Syringeless CT Power Injector.

(p) The pitch (in computed tomography) is the ratio of the patient table increment to the total nominal beam width for the CT scan. The pitch factor relates the volume coverage speed to the thinnest sections that can be reconstructed. In spiral CT, dose is always inversely proportional to pitch.
Among the different manufacturers, there are various definitions of pitch depending on whether a single-detector (single-slice) or multi-detector (multi-slice) CT scanner is used.

A computed tomography (CT) of the abdomen images the region from the thoracic diaphragm to the pelvic groin. The computed tomography technique uses x-rays to differentiate tissues by their different radiation absorption rates.
Oral contrast material can be given to opacify the bowel before scanning. An i.v. injection of a contrast agent (x-ray dye) improves the visualization of organs like liver, spleen, pancreas and kidneys and provides additional information about the blood supply.
Spiral- or helical CT, including improvements in detector technology support faster image acquisition with higher quality. Advanced CT systems can usually obtain a CT scan of the whole abdomen during a single breath hold. This speed increases the detection of small lesions (caused by differences in breathing on consecutive scans) and is beneficial especially in pediatric, elderly or critically-ill patients.
Changes in patient weight require variations in x-ray tube potential to maintain constant detector energy fluence. An increased x-ray tube potential improves the contrast to noise resolution (CNR).

An abdominal CT is typically used to help diagnose the cause of abdominal pain and diseases such as:
Other indications for CT scanning of the abdomen/pelvis include planning radiation treatments, guide biopsies and other minimally invasive procedures. Advanced techniques include for example 3D CT angiography, multiphasic contrast-enhanced imaging, virtual cystoscopy, virtual colonoscopy, CT urography and CT densitometry.

See also Contrast Enhanced Computed Tomography.

The angular response is the reaction of the detector to particles or photons which hit the detector at angles deviant from a normal to the facial plane of usual incidence.