Radiation safety concerns the safe use of ionizing radiation. The radiation exposure has to be controlled to protect people and the environment from unnecessary exposure and the damaging effect to the health. Legal regulations require that radiation exposure (individual radiation exposure as well as collective dose) must be kept as low as reasonably achievable.
The electromagnetic spectrum includes x-rays, gamma rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. Additionally, there are several types of particulate radiation e.g., alpha and beta particles. All types of radiation are used in a wide range of medicine, industry, research and communication. Radiation risks can occur due to either long-term low level exposure or short-term high level exposure. A well-functioning dosimetry program is essential for a safe use and for compliance with federal and state regulations.

Three basic rules have to be observed for a safe use of ionizing radiation.

See also Inverse Square Law, Administrative Dose Guidelines and Annual Dose Limit.

Radiation shielding is the process of limiting the penetration of radiation into the environment, by blocking with a barrier made of impermeable material. This protective barrier is usually formed of a material with high density, for example lead that absorbs the radiation.
Radiation sources are self-shielded with absorbing material incorporated into the equipment, adjacent to the source to reduce stray radiation to the surrounding area below dose limits.
Rooms with x-ray or other radiation equipment are additionally shielded with lead-lined walls to reduce the radiation exposure to humans within the facility. The amount of shielding required to protect against different kinds of radiation depends on how much energy they have. The shielding calculations are based on the half value layer of the primary radiation beam. Sufficient half value layers of shielding are calculated to reduce the radiation exposure outside the room to reasonable levels.
Personal shielding requirements depending on the type of radiation:
See also Radiation Safety.

Radioactive decay is the change of instable atoms to a more stable state. This change to a different nuclide by the spontaneous emission of radiation such as alpha or beta particles, gamma rays, or by electron capture follows an element-specific decay chain. Each step in the decay chain has a definite half-life.
Sometimes also the reduction of excitation energy of the nucleus by e.g. internal conversion is mentioned as radioactive decay.

See also Decay Chain, Radioisotope.

Radionuclides are naturally occurring or artificially produced atoms with unstable nuclei. Therefore radionuclides undergo a radioactive decay, and emit gamma ray(s) and/or subatomic particles.
Radionuclides are used as agents in nuclear medicine and to destroy tumors in cancer therapy.

See Isotope and Radioactive Decay.

(R) R is a unit to express exposure to radiation (x-rays or gamma rays). 1 R corresponds to the generation of approximately 2.08 x10⁹ ion pairs (1 electrostatic unit of charge) (in 1 cm³ of dry air at 0 °C and 760 torr). 1 R, converted to SI, equals 2.58 x10^-4 coulombs per kg of air.