(PSF) The point spread function describes the response of an imaging system to a point or impulse input. A hypothetical point object will generally have an extended (blurred) image resulting from the imaging process; this is the point spread function characterizing the imaging process. Considering any object as composed of an assembly of point objects, knowledge of the PSF permits the prediction of how the object will be imaged, assuming linearity of the imaging process.

See also Resolution, Phantom and Daily Quality Assurance.

A cinefluorography produces a movie (cine) film from an image intensifier during x-rays examinations (often called videofluorography, cineradiography or cine). Cinefluorography is always monitored on the TV screen normally used for fluoroscopy. The image from the output screen of the image intensifier is split with a semi-transparent mirror into two output ports; one leading to the movie camera and the other to the fluoroscopy camera. Most of the light is directed to the cine camera. The image on the monitor does not suffer in quality due to the fact that the tube current for cinefluorography is about 100 times higher than for common fluoroscopy.
The x-ray generator pulses are synchronized with the movements of the cine camera, so that no x-rays are emitted when the film is moved forward to the next frame. The needed very accurate synchronization of the x-ray generator can be achieved by use of high voltage switching in the secondary circuit of the constant potential x-ray generator, by starting and stopping the inverter in a medium frequency generator or by using a grid controlled x-ray tube.

A computed tomography (CT) of the abdomen images the region from the thoracic diaphragm to the pelvic groin. The computed tomography technique uses x-rays to differentiate tissues by their different radiation absorption rates.
Oral contrast material can be given to opacify the bowel before scanning. An i.v. injection of a contrast agent (x-ray dye) improves the visualization of organs like liver, spleen, pancreas and kidneys and provides additional information about the blood supply.
Spiral- or helical CT, including improvements in detector technology support faster image acquisition with higher quality. Advanced CT systems can usually obtain a CT scan of the whole abdomen during a single breath hold. This speed increases the detection of small lesions (caused by differences in breathing on consecutive scans) and is beneficial especially in pediatric, elderly or critically-ill patients.
Changes in patient weight require variations in x-ray tube potential to maintain constant detector energy fluence. An increased x-ray tube potential improves the contrast to noise resolution (CNR).

An abdominal CT is typically used to help diagnose the cause of abdominal pain and diseases such as:
Other indications for CT scanning of the abdomen/pelvis include planning radiation treatments, guide biopsies and other minimally invasive procedures. Advanced techniques include for example 3D CT angiography, multiphasic contrast-enhanced imaging, virtual cystoscopy, virtual colonoscopy, CT urography and CT densitometry.

See also Contrast Enhanced Computed Tomography.

A film processor is a peripheral x-ray equipment used in conjunction with a camera to create hard-copy images. Film processors should be maintained at their optimum operating conditions by regular quality control procedures. Optimal film processing has important implications for the diagnostic quality of the image stored on film.

A phantom is an artificial object of known size and composition that is imaged to test, adjust or monitor the linearity, sensitivity, homogeneity, imaging performance and geometric aspects of CT scanners, gamma cameras or other radiographic systems. A phantom can be a fluid-filled container or bottle including structures of various materials, sizes and shapes.

See also Daily Quality Assurance and Acceptance Checking.