Linearity is a property of a system, characterized by output that is directly proportional to the input.
In computed tomography (CT), linearity describes the amount to which the CT number of a material is exactly proportional to the density of this material (in Hounsfield units). This accuracy between the linear attenuation coefficient and the CT number is also utilized to describe the performance of a CT scanner.
The linearity of a gamma camera is a measure of the geometrical correctness of the images.

Mammography is a diagnostic imaging procedure of the breast to detect and evaluate breast disease. Mammography is widely used as a screening method and plays a key role in early breast cancer detection.
The screening mammography is used to detect breast changes in women who have no signs or symptoms or noticed breast abnormalities. The goal is to detect a breast tumor before any clinical signs are observable.
A diagnostic mammography is used to investigate suspicious breast changes, such as a breast lump, an unusual skin appearance, breast pain, nipple thickening or nipple discharge.
A breast screening or standard mammography requires two mammograms from different angles of each breast including craniocaudal view and mediolateral view. Additional images can be made from other angles or focus on microcalcifications or other suspicious areas.
A mammogram is created by special mammography equipment with long wavelength of the used x-rays. Film-screen mammography is still the most widely used technology, but the state of the art technique is digital mammography. Conventional x-ray equipment was used to produce mammograms until dedicated mammography equipment became available in the late 1960s. Film-screen mammography and xeromammography, introduced in the early 1970s, used lower radiation doses and produced sharper mammograms. The second generation of mammography systems has been introduced in the early 1980s. Chief disadvantages of analog mammography include the labor-intensive handling of the cassettes, relatively slow processing time, the lack of a direct interface to the x-ray system, and no post processing possibilities.
Mammograms of high quality should be done with the lowest radiation dose as possible. Adequate breast compression is important due to shortening of the exposure times, immobilization of the breast, reduction of motion and blurring and prevention of overpenetration by means of equalizing breast thickness.
Further breast imaging procedures include breast ultrasound and breast MRI.

On October 19, 2001, Philips Medical Systems completed an acquisition strategy through its purchase of Marconi Medical Systems.
The History of Marconi Medical Systems
2001 Royal Philips Electronics and Marconi plc announced that Philips has agreed to acquire Marconi Medical Systems for $1.1 billion.
2000 Marconi introduces Infinite Detector Technology for Mx8000 multislice CT scanner, which acquires an unprecedented 16 simultaneous slices with sub-millimeter isotropic accuracy.
1999 At RSNA, Picker International unveils the new Marconi Medical Systems name and corporate vision.
1998 Picker International acquires the Computed Tomography Division of Elscint Ltd, immediately positioning Picker at the forefront of major global CT suppliers.
1986 Picker produces the industry's first 1.0T MR imager.
1981 Picker is sold to General Electric Co. Ltd. of England (GEC). Picker merged with Cambridge Instruments, GEC Medical, and American Optical to form Picker International.
1967 The name changed from Picker x-ray to Picker Corporation. Picker acquired Dunlee.
1946 The Dunlee Corporation started in Chicago by Dunmore Dunk and Zed. J. Atlee to meet demand for quality x-ray tubes and special purpose tubes.
1915 James Picker Company formed in New York City offering sales and service of x-ray equipment, film and accessories.

A matrix is an array of numbers in rows and columns. The horizontal lines in matrices are called rows and the vertical lines are called columns. A matrix with m rows and n columns is called an m-by-n matrix (or mxn matrix) and m and n are called its dimensions. The matrix used in computed tomography determines the scan resolution.
Matrices are useful to record data that depend on two categories, and to keep track of the coefficients of systems of linear equations and linear transformations.

See also Image Resolution and Zooming.

The mediolateral view is one of the common routine views for mammography in addition to the craniocaudal view. The image receptor of the mammography system is placed lateral to the breast, and the horizontal x-ray beam is directed from medial to lateral through the breast.