A logarithmic measure of sound loudness closely related to the decibel. The unit decibel is used for objective measurements that mean, they measure the actual pressure of the sound waves as recorded using a microphone. The unit phon is used for subjective measurements, which means, measurements made using the ears of a human listener.
A sound has the loudness 'p' phon if it seems to the listener to be equal in loudness to the sound of a pure tone of the frequency 1 kilohertz and strength 'p' decibel. A measurement in phons will be similar to a measurement in decibels, but not identical, since the perceived loudness of a sound depends on the distribution of frequencies in the sound as well as the pressure of the sound waves. In the U.S., sound loudness is frequently measured in sones rather than phons: a sound of loudness x sones has loudness 10 log2 x + 40 phons.

(dB) A customary logarithmic measure most commonly used (in various ways) for measuring sound. Decibel is a way to express the ratio of two sound intensities: dB=10log10I1/I2 being I1 the reference. If one sound is 1 bel (10 decibel) 'louder' than another, this means the louder sound is 10 times louder than the fainter one. A difference of 20 decibel corresponds to an increase of 10 x 10 or 100 times in intensity.
The intensity of ultrasound is measured in db/cm and decreases during the propagation.
For sound pressure (the pressure exerted by the sound waves) 0 decibel equals 20 micropascal (µPa), and for ultrasonic power 0 decibel sometimes equals 1 picowatt.
See also Phon, Pascal, Logarithms, Proportionality Constant, Watt, Diagnostic Imaging.

Imaging refers to the visual representation of an object. Today, diagnostic imaging uses radiology and other techniques, mostly noninvasive, to create pictures of the human body. Diagnostic radiography studies the anatomy and physiology to diagnose an array of medical conditions. The history of medical diagnostic imaging is in many ways the history of radiology. Many imaging techniques also have scientific and industrial applications. Diagnostic imaging in its widest sense is part of biological science and may include medical photography, microscopy and techniques which are not primarily designed to produce images (e.g., electroencephalography and magnetoencephalography).
Brief overview about important developments:
Imaging used for medical purposes, began after the discovery of x-rays by Konrad Roentgen 1896. The first fifty years of radiological imaging, pictures have been created by focusing x-rays on the examined body part and direct depiction onto a single piece of film inside a special cassette.
In the 1950s, first nuclear medicine studies showed the up-take of very low-level radioactive chemicals in organs, using special gamma cameras. This diagnostic imaging technology allows information of biologic processes in vivo. Today, single photon emission computed tomography (SPECT) and positron emission tomography (PET) play an important role in both clinical research and diagnosis of biochemical and physiologic processes.
In the 1960s, the principals of sonar were applied to diagnostic imaging. Ultrasound has been imported into practically every area of medicine as an important diagnostic tool, and there are great opportunities for its further development. Looking into the future, the grand challenges include targeted contrast imaging, real-time 3D or 4D ultrasound, and molecular imaging. The earliest use of ultrasound contrast agents (USCA) was in 1968.
The introduction of computed tomography (CT/CAT) in the 1970s revolutionized medical imaging with cross sectional images of the human body and high contrast between different types of soft tissues. These developments were made possible by analog to digital converters and computers. First, spiral CT (also called helical), then multislice CT (or multi-detector row CT) technology expanded the clinical applications dramatically.
The first magnetic resonance imaging (MRI) devices were tested on clinical patients in 1980. With technological improvements including higher field strength, more open MRI magnets, faster gradient systems, and novel data-acquisition techniques, MRI is a real-time interactive imaging modality that provides both detailed structural and functional information of the body.

Today, imaging in medicine has been developed to a stage that was inconceivable a century ago, with growing modalities:
x-ray projection imaging, including conventional radiography and digital radiography;
All these types of scans are an integral part of modern healthcare. Usually, a radiologist interprets the images. Most clinical studies are acquired by a radiographer or radiologic technologist. In filmless, digital radiology departments all images are acquired and stored on computers. Because of the rapid development of digital imaging modalities, the increasing need for an efficient management leads to the widening of radiology information systems (RIS) and archival of images in digital form in a picture archiving and communication system (PACS). In telemedicine, medical images of MRI scans, x-ray examinations, CT scans and ultrasound pictures are transmitted in real time.

See also Interventional Radiology, Image Quality and CT Scanner.

Breast imaging methods include mammography (mammogram), ultrasound, breast MRI, positron emission tomography, xeromammography, diaphanography and thermography.
Mammography is widely used as a screening method and diagnostic tool for breast cancer detection or evaluation of breast disease. Digital mammography takes multiple thin digital image 'slices' through the breast, which provides higher potential to see a small mass within dense tissue. The mammography quality standards act guarantees a high image quality.
Breast ultrasound (also called ultrasonography) should only be used as an additional imaging modality to evaluate specific breast abnormalities, especially to differentiate cystic from solid masses. Ultrasound is also used to guide needle breast biopsies.
Magnetic resonance imaging (MRI) is useful for breast MRI screening in cases of high cancer risk. In addition, multifocal breast cancer can be missed by standard practice mammography and can be early detected with breast MRI.

Bone densitometry measures the strength and density of bones. Changes in trabecular bone mineral density (BMD) is an early indicator of change in metabolic function. Bone densitometry measures the amount of calcium in regions of the bones. A bone densitometer is used to determine the risk of developing osteoporosis and can also be used to estimate a patient's risk of fracture.
Bone densitometry methods involve:
Dual energy x-rays (DEXA) or CT scans (Osteo CT or QCT) compare the numerical density of the bone (calculated from the image), with empirical data bases of bone density. DEXA is widely available and has an accuracy between those of QCT and ultrasound.