The company is developing and making specialized medicines for treating multiple sclerosis, dermatological disorders, female health concerns, cancer and is creating new diagnostic imaging techniques. Berlex, Inc. is a pioneer in the imaging market. It has introduced a broad range of imaging agents. Its contribution began in 1988 with the introduction of the world's first magnetic resonance imaging agent, Magnevist® (gadopentetate dimeglumine) injection. Berlex is headquartered in New Jersey and the U.S. affiliate of Bayer Schering Pharma AG, Germany.

(CTA) A computed tomographic angiography or computerized tomography angiogram is a diagnostic imaging test that combines conventional CT technique with that of traditional angiography to create images of the blood vessels in the body - from brain vessels to arteries of the lungs, kidneys, arms and legs.
High resolution CT scans with thin slices and intravenous injection of iodinated contrast material provide detailed images of vascular anatomy and the adjacent bony structures. CTA requires rapid scanning as the imaging data are typically acquired during the first pass of a bolus of contrast medium. The selection of acquisition timing is important to optimize the contrast enhancement, which is dependent on contrast injection methods, imaging techniques and patient variations in weight, age and health. CT angiography is less invasive compared to conventional angiography and the data can be rendered in three dimensions.

CTA techniques are commonly used to:
See also Cardiovascular Imaging, Magnetic Resonance Angiography MRA, Coronary Angiogram, Computed Tomography Dose Index and Computed or Computerized Axial Tomography.

(CECT) Contrast agents are used during contrast enhanced computed (or computerized) tomography examinations to highlight specific tissues and parts of the body. Bones can be clearly seen on x-ray images, the visualization of some other organs and soft tissues is more difficult. Sufficient contrast is important in perceiving a difference in the density between areas of a CT image. The identification of a disease may be challenging due to very low contrast between pathological tissues (for example tumors, metastases and abscesses), normal organ structures and surrounding tissues.
Contrast agents are used in CT angiography (CTA) to delineate vessels, in multiphasic CT studies to provide dynamic information of blood supply (e.g., liver CT) and in CECT studies of various body parts to achieve opacification of tissue of interest (e.g., kidney CT) in relation to the background tissue. Contrast enhanced multi-detector row CT (MDCT) replaces several conventional diagnostic imaging methods such as intravenous urography, cholangiography, or catheter angiography, due to advanced CT studies with fast examination times, high contrast enhancement, perfusion measurement and multiplanar reformatting capabilities.
See also Contrast Media Injector, Single-Head CT Power Injector, Multi-Head Contrast Media Injector, Syringeless CT Power Injector, CT Power Injector.

Contrast media injectors are part of the medical equipment used to deliver fluids in examinations such as CT, MRI, fluoroscopy and angiography. Many of these diagnostic imaging procedures include the administration of intravenous contrast agents to enhance the blood and perfusion in tissues.

Mainly there are two types of injector technology:
See also Single-Head Contrast Media Injector, Dual-Head CT Power Injector, Syringeless CT Power Injector.

The use of x-ray contrast agents in computed tomography (CT) began with a hand injection by the radiologist in the scan room. During its history, CT scanners have made great improvements in speed and image quality. Actual CT systems with multiple detectors allow scan times of a few seconds per body region. Some CT protocols require multiphase scans, where a body region is imaged with a single bolus of contrast in different blood flow phases. Automatic power (pressure) contrast media injectors are required to provide precise control of flow rate, volume and timing of injection. The use of a saline bolus following contrast administration reduces the volume of contrast required.

Most relevant topics for the use of a power injector in medical imaging procedures such as contrast enhanced computed tomography (CECT):
Must have basic injector control options:
Examples of other injector control options:

Conventional (also called analog, plain-film or projectional) radiography is a fundamental diagnostic imaging tool in the detection and diagnosis of diseases. X-rays reveal differences in tissue structures using attenuation or absorption of x-ray photons by materials with high density (like calcium-rich bones).
Basically, a projection or conventional radiograph shows differences between bones, air and sometimes fat, which makes it particularly useful to asses bone conditions and chest pathologies. Low natural contrast between adjacent structures of similar radiographic density requires the use of contrast media to enhance the contrast.
In conventional radiography, the patient is placed between an x-ray tube and a film or detector, sensitive for x-rays. The choice of film and intensifying screen (which indirectly exposes the film) influence the contrast resolution and spatial resolution. Chemicals are needed to process the film and are often the source of errors and retakes. The result is a fixed image that is difficult to manipulate after radiation exposure. The images may be also visualized on fluoroscopic screens, movies or computer monitors.
X-rays emerge as a diverging conical beam from the focal spot of the x-ray tube. For this reason, the radiographic projection produces a variable degree of distortion. This effect decreases with increased source to object distance relative to the object to film distance, and by using a collimator, which let through parallel x-rays only.
Conventional radiography has the disadvantage of a lower contrast resolution. Compared with computed tomography (CT) and magnetic resonance imaging (MRI), it has the advantage of a higher spatial resolution, is inexpensive, easy to use, and widely available. Conventional radiography can give high quality results if the technique selected is proper and adequate. X-ray systems and radioactive isotopes such as Iridium-192 and Cobalt-60 for generating penetrating radiation, are also used in non-destructive testing.

See also Computed Radiography and Digital Radiography.